SUNLIT TECH OTD-40T Wired 2 Pir And Microwave Motion Detector For Outdoor Protection (White)

SUNLIT TECH OTD-40T Wired 2 Pir And Microwave Motion Detector For Outdoor Protection (White) looks good in design, features and function. The best function of this product is really simple to clean and control. The design and layout are very fantastic that make it really appealing and beauty. Many individuals feel attracted to purchase and utilize it. Every feature is developed to fulfill people require as its function too. It is stunning and ideal product for simple setup, upkeep, and control device.

Asin	:	B00GNRBQBG
Category	:	Electronics
Color	:	White
Brand	:	SUNLIT TECH
Sales Rank	:

Features SUNLIT TECH OTD-40T Wired 2 Pir And Microwave Motion Detector For Outdoor Protection (White)

Wired outdoor

Anti-mask, and/or selection

Pet immunity, water proof

Honestly, the product is extremely smart function, healthy and safety for users. SUNLIT TECH OTD-40T Wired 2 Pir And Microwave Motion Detector For Outdoor Protection (White) is very helpful to finish all user requires. The design is very light, appealing and elegant one. With the newest innovation, this product can meet all individuals expectation with fantastic function and function. It is easy to buy from the dedicated vendor. Individuals can get and acquire it online on the web by this site. The vendor is very useful to serve and send out the product on time shipment. It is extremely exceptional service for the top quality product. The one characteristic to consider about this product that there is no one felt trouble and dissatisfied with it. It works perfectly as the ads said previously.

Descriptions SUNLIT TECH OTD-40T Wired 2 Pir And Microwave Motion Detector For Outdoor Protection (White)

This is also an important factor to consider, as consumer self-confidence in certain companies over others dictates that more of their products have been purchased and used with satisfaction. You will surely have more security buying from one of these popular suppliers.After you have done all the search, there is one final thing to check out and perhaps use to complete your selection process. Suppose you have narrowed your decision right down to 3 products , but are uncertain how to pick the one to buy.

View larger

General Introduction

This is a fashionable three-tech motion detector for outdoor protection. It has two PIR plus microwave detection module as well as ASIC micro processing to keep more accurate and comprehensive detection on intrusion objects. It has the advanced "AND" and "OR" two modes so that the user can setup high/low detection sensitivity targeted for different environment. Besides, it also be with "EI" Mode to avoid the damge of dropes spraying on the lens. The client can flexible choose the best way of detecting as actual requirements and realize the lowest rate of flase alarm or failure alarm. The detector is tamper protected and anti-maksing, it can be used both indoor and outdoor.

What is "AND"/"OR"/ "EI" mode

The modes "AND" and "OR" are opposite to each other. Under "AND" mode, the detector can not send alarms unless all the sensor (two PIR+Microwave radar) receive the intrusion signal at the same time, whereas under "OR" mode, any intrusion signal will activate the detector. The front is suitable for the protection in a unstable environment, where the PIR sensor or microwave randar are easily interfered by unwanted factors; The latter is suitable for the protection in high stable environment, where the detector is highly sensitive to intrusion signals. As for "EI" mode, it's developed based on "AND" mode. Under "AND" mode, if somebody daube paint or oil drop on the lens, it will badly affect the detector that its PIR sensor can't detect intrusion signal, as a result, failure alarm emerged. But when setting "EI" mode, it will prevent this matter and keep the detector normally alarm.

What should we noticed when install this detector?

a. PIR Motion Detector should not be installed near the Air conditioner places where with cold wind or hot wind flow, because PIR motion detector is sensitive with the temperature changes of environment. Environment changes quickly will cause false alarm. b. PIR should not be installed facing the glass window, facing glass window will interfered by the outside sunlight and moving objects (people or vehicle). The infrared energy can penetrate the glass window. c. PIR should not be installed facing the moving objects or background changing objects, movement object will cause airflow change, it may cause false alarm. d. Between the detection range of PIR Motion detector, there is should be less objects. Many objects may reduce the sensitive of detection range. e. Do not install more than one (2 or above) Wireless PIR in the same detection space (like at the same room). f. After installed the PIR motion detector, installer should walk S steps in the detection range for checking the PIR Motion detector.

Specification

• Power supply:9-16V DC
• Current:30mA
• Installation height:1.5m- 2.4m
• Detection mode:"AND"/ "OR"/ "EI"
• Coverage:12x12m, 110°
• MW frequency:10.525GHz
• Anti RFI/EMI:0.1-500MHz/3V
• Anti-white light:＞1000Lux
• Alarm output:100mA/24V
• Mask output:100mA/24V
• Pet immunity:≤25KG
• Temperature:-20℃ to + 55℃
• Humidity (RH):95%
• Dimensions (H*W*D):160mm x 65mm x 50.5mm

Tweet

Similar post

— SUNLIT TECH